Search
Now showing items 241-250 of 372
Experimental investigation of skewed elastomeric expansion bridge bearings (FHWA-OK-86-5)
(1986-8)
Twelve skewed elastomeric expansion bridge bearings were supplied by
the Oklahoma Department of Transportation. To evaluate the performance of
these skewed bearings, the following six phases of testing were conducted on ...
Portland cement concrete pavement restoration (84-01-1)
(1988-3)
The purpose of this study was to evaluate the design,
construction, and performance of the latest methods for
restoration of Portland cement concrete pavements (PCCP).
The CPR techniques demonstrated included full depth ...
Evaluation of an experimental protective coating for bridge steel (88-03)
(1989-10)
This report describes the application of an experimental
metal sealer to bridge beams which are coated with lead-based
paint.
Regulations developed by the Environmental Protection Agency
(EPA) , prohibit the introduction ...
Mix design using asphalt millings (FHWA-OK-00-04) 2148
(2000-8)
A field demonstration project was undertaken by the Research & Development Division, Oklahoma Department of Transportation (ODOT), to investigate the performance of an asphalt overlay constructed using recycled asphalt ...
DEVELOPMENT AND IMPLEMENTATION OF AN MEPDG FOR RIGID PAVEMENTS – PHASE 3 (FHWA-OK-16-04 2208)
(2016-12)
The objective of the Phase III of this project is to validate and calibrate the MEPDG for the concrete pavement design in Oklahoma. Both jointed plain concrete pavement (JPCP) and continuously reinforced concrete pavement ...
Advanced Voice and Multimedia Communications System for the ODOT ITS Network (FHWA-OK-08-04 2204)
(2008-9)
Across the State of Oklahoma there are a multitude of agencies, at the federal, state, and local levels, all responsible for responding to emergency situations. Many of these agencies have a presence on the private ODOT ...
DEVELOPMENT OF ODOT GUIDELINES FOR THE USE OF GEOGRIDS IN AGGREGATE BASES (FHWA-OK-12-04 2220)
(2012-3)
A primary objective of the current study was to help ODOT expand its selection of approved geogrid products for base reinforcement applications by producing measured ata on selected geogrids and a dense-graded base aggregate ...
COMPILATION OF LOCAL STUDIES AND REGIONAL CALIBRATION OF PAVEMENT ME DESIGN FOR RIGID AND FLEXIBLE PAVEMENTS IN OKLAHOMA (FHWA-OK-19-08 2277)
(2019-11)
The AASHTOWare Pavement ME Design software was developed as an advanced pavement design tool based on the mechanistic-empirical pavement design guide (MEPDG). The existing performance prediction models utilized in this ...
Related studies to cathodic protection of reinforced concrete structures no. 2 - progress report
(1977-1)
This progress report surnmarizes the work done on the project from its inception to the present time. The project has been divided into four sections: conductive layer, reference electrode, long-term current, and corrosion ...