Effectiveness of impermeable barriers for retardation of pollutant migration /

Abstract

This paper presents the results of the analysis of the movement of contaminated ground water under or through an imperfect barrier. The first phase of the analysis consists of the development of an analytical solution for the flow of ground water under a barrier and a simple numerical integration technique for developing concentration breakthrough curves. This simple solution algorithm was applied to the cases of variable recharge rates and lengths, variable depths of penetration of the barrier, and anisotropic soils. The second phase of the analysis involves applying a numerical solute transport model to analyze the performance of a barrier with and without the effects of hydrodynamic dispersion, and in the presence of a layered soil, and finally the performance of a fully penetrating but partially permeable barrier.

Currently one of the most popular methods of containing contaminated ground water is through use of subsurface impermeable barriers. These barriers can take one of three forms; slurry walls, grout curtains, or steel sheet-piles. Successful operation of these barrier systems is dependent upon three basic criteria. First, the barrier must be truly impermeable and remain so over time even upon exposure to the contaminated ground water. Second, there must exist an underlying impermeable formation, at a reasonable depth, to which the barrier can be connected. Third, an adequate connection between the barrier and the underlying formation must be assured.