Browsing OSU - International Conference on Web Handling by Title

Now showing items 216-235 of 429

    • Mechanistic survey of accumulating, resonant, and self-exciting systems in web handling 

      Roisum, David R. (Oklahoma State University, 2009-06)
      Certain problems in web handling can be challenging because they tend to get worse with time. Consider mechanical resonance. The longer you run at resonant vibration conditions, the worse the problem will initially get. ...

    • Mechatronic damping for contact rolls in film winders 

      Sieber, Bernd (Oklahoma State University, 2007-06)
      The winding of a web is one of the most extensive and error-prone processes in web handling. All known solutions are limited in the range of properties and production parameters. To broaden the mentioned limits, a new ...

    • Method for calculating catenary web spans 

      Dobbs, James N.; Carlson, Daniel H. (Oklahoma State University, 2013-06)
      The methods for calculating the catenary droop of a wire or cable hanging from fixed supports are well understood. For many common web materials, catenary droop or sag is not a consideration but for webs having a significant ...

    • Method for measuring wound-on-tension 

      Paanasalo, J. (Oklahoma State University, 2003-06)
      The Wound On Tension (WOT) is the web machine direction stress as it has just passed the winding nip into the roll. It is the most important quantity that determines the wound roll structure and its internal radial stress ...

    • Model for the prediction of wound roll dishing 

      Cole, K. A. (Oklahoma State University, 1997-06)
      Historically, wound-roll models have been used to predict stress levels which develop within winding and wound rolls. To gain maximum benefit from these models, stresses must be incorporated into defect or failure models. ...

    • Model-based control of lateral web behavior - An interconnection of two web guiding systems within packaging machinery 

      Philipp, Andre; You, Chang (Oklahoma State University, 2015-06)
      Within packaging industry mostly web materials are used to form bags or similar shaped packages. In order to professionally convert these materials and achieving increasing quality requirements of bags, detailed knowledge ...

    • Modeling and analysis of rotogravure printing presses 

      Seshadri, A.; Pagilla, P. R.; Lynch, J. E. (Oklahoma State University, 2011-06)
      Print registration is the method of overlapping successive printed patterns to form a complex multicolor pattern. Registration error is the misalignment in the overlapped patterns. This paper deals with modeling machine ...

    • Modeling and computer simulation of zero speed splice unwinds 

      Pagilla, Prabhakar R. (Oklahoma State University, 2017-06)
      A computer program for conducting model simulations for zero speed splice unwinds is described in this paper. A typical unwind system consisting of the unwinding material roll, festoon, dancer, and pull rolls is considered. ...

    • Modeling and control of web velocity and tension: An industry/university perspective on issues of importance 

      Carlson, Dan H.; Pagilla, P. R.; Weaver, Mark D. (Oklahoma State University, 2009-06)
      The goal of this paper is to provide an overview of current industrial practice in control of web velocity and tension and discuss some critical issues that require future research from the community which is pertinent to ...

    • Modeling and frequency response of web tension with a pendulum dancer, and comparison of load-cell and dancer based tension control systems 

      Raul, P. R.; Pagilla, P. R. (Oklahoma State University, 2011-06)
      In web processing lines, web tension is typically regulated using an outer loop that provides a trim to the velocity reference of the inner velocity loop. The feedback signal for the outer tension loop is either a position ...

    • Modeling and H-infinity robust control for winding systems 

      Koc, H.; Knittel, D.; de Mathelin, M.; Abba, G. (Oklahoma State University, 2001-06)
      This paper presents the modeling and the H-infinity robust control for an elastic web transport system including an unwinder, a winder and a traction motor. This model has been created using laws of Physics concerning ...

    • Modeling and identification of the source of oscillations in web tension 

      Branca, C.; Pagilla, P. R.; Reid, K. N. (Oklahoma State University, 2009-06)
      Although there has been much work in dynamic modeling of different web handling elements and web longitudinal behavior, efforts to systematically validate models by experimentation on a web platform are non-existent. ...

    • Modeling grooved rolls with moving 2D porous media 

      Nurmi, Simo; Berstrom, Fredrik; Immonen, Eero; Lehtinen, Antti; Juppi, Kari; Martinsson, Lars (Oklahoma State University, 2009-06)
      Rolls are widely used in paper machines to heat, press and support paper webs and fabrics in order to facilitate rapid drying and transport of the paper web through the machine. In modern high speed paper machines, however, ...

    • Modeling nip induced tension in wound rolls 

      Good, J. K. (Oklahoma State University, 2001-06)
      Web materials are wound into coils by a variety of winders. Some winders center wind only. In this type of winding torque is provided to a core and web winds up on the core. Other types of winders have a roller, often ...

    • Modeling of edge rolls defects 

      Olsen, J. E. (Oklahoma State University, 1999-06)
      Based upon Hakiel's nonlinear orthotropic model for wound rolls, a model has been developed which takes into account widthwise variations in web properties. The model includes widthwise variations in the elastic modulus ...

    • Modeling of laminated webs 

      Pagilla, P. R.; Reid, K. N.; Newton, J. (Oklahoma State University, 2007-06)
      A dynamic model of the longitudinal behavior of a laminated web is developed. A single web model that takes into account both thermal and hygral strains is developed first from first principles; the model assumes heat ...

    • Modeling of nip pressures and web feed rates in rubber covered nip rollers 

      Cole, Kevin (Oklahoma State University, 2013-06)
      Nip rollers are used extensively in converting processes; however, correct design and usage of these types of rollers requires a sound understanding of the mechanics of the nip in both the machine and cross-width directions. ...

    • Modeling of the transport behavior of low modulus webs 

      Raul, Pramod R.; Pagilla, Prabhakar R. (Oklahoma State University, 2013-06)
      We consider three key issues in this study for low modulus webs. First, transport in the high strain region is considered when the materials exhibit nonlinear and viscoelastic behavior. Second, in-plane biaxial strain is ...

    • Modeling rubber covered nip rollers in web lines 

      Good, J. K. (Oklahoma State University, 2001-06)
      Rubber covered nip rollers have a number of applications within web lines. Rubber covered rollers are often used to nip the web against a metal surfaced roller that is driven to achieve a certain web velocity or web tension. ...

    • Modeling slip between a web and a roller 

      Reish, Benjamin D.; Reid, Karl N. (Oklahoma State University, 2019-06)
      In roll-to-roll processes, slip between a web and a roller may be considered a defect. Slip can cause scratches which can be detrimental to a product, if not catastrophic. As line speeds increase to meet demands for more ...