Show simple item record

dc.creatorCross, Stephen A.
dc.creatorLi, Joshua
dc.creatorWang, Kelvin
dc.date.accessioned2018-01-30T16:25:42Z
dc.date.available2018-01-30T16:25:42Z
dc.date.issued2017-3
dc.identifier.govdocFHWA-OK-17-01
dc.identifier.otherOklahoma Department of Transportation State Planning and Research item number 2270
dc.identifier.urihttps://hdl.handle.net/11244/54335
dc.description.abstractThis report documents the construction and evaluation of the asphalt pavement testing runway at the OSU Unmanned Aerial Vehicle (UAV) facility. Runway surface characterization and performance evaluation results, in terms of pavement roughness, longitudinal profiling, surface texture, and friction, are presented in Part 1 based on the two rounds of data collection performed in 2014 and 2015 using several art-of-the-state instruments. Part 2 presents the results from the construction and evaluation of an experimental shoulder mix placed on the east side of the UAV runway. The dynamic modulus testing and SCB test were performed to evaluate the four mixtures used in the facility.
dc.format.extent62 pages
dc.format.extent3,001,499 bytes
dc.format.mediumapplication.pdf
dc.languageen_US
dc.relation.ispartofseriesNo
dc.relation.requiresAdobe Acrobat Reader
dc.relation.urihttp://www.okladot.state.ok.us/Research/FinalRep_2270_FHWA-OK-17-01.pdf
dc.titleDEVELOPMENT OF AN ASPHALT PAVEMENT TEST FACILITY AT THE OSU UNMANNED AERIAL VEHICLE FACILITY (FHWA-OK-17-01 2270)
dc.typeTechnical Report
dc.description.versionFinal report, October 2011-December 2013
dc.description.peerreviewNo
dc.type.materialtext
dc.subject.keywordsAsphalt pavement
dc.subject.keywordstestfacility
dc.subject.keywordssurface characterization
dc.subject.keywordsdynamic modulus
dc.subject.keywordsSCB test
dc.contributor.sponsorOklahoma Department of Transportation. Materials and Research Division. Office of Research & Implementation


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record