Search
Now showing items 1-8 of 8
Evaluating Percent Within Limits (PWL) Specifications Volume 1: HMA Specifications (FHWA-OK 06(05)v1 2172)
(2006-5)
The Oklahoma Department of Transportation (ODOT) has let four paving jobs for construction where percent within limits (PWL) specifications were employed. The PWL specifications are intended to be used as part of the Quality ...
RECOMMENDED FATIGUE TEST FOR OKLAHOMA DEPARTMENT OF TRANSPORTATION (FHWA-OK-16-05 2243)
(2017-10)
The primary objective of this study was to evaluate different fatigue test methods and to recommend the most suitable one to Oklahoma Department of Transportation (ODOT). In order to achieve this objective, six commonly ...
Determination of Dynamic Modulus Master Curves for Oklahoma HMA Mixtures (FHWA-OK 07(05) 2177
(2007-12)
The Mechanistic-Empirical Pavement Design Guide (M-EPDG) uses a hierarchical approach with three levels of material characterization for asphalt materials. The first level provides the highest design reliability and each ...
Fatigue Performance of Asphalt Pavements Containing RAS and RAP
(Oklahoma City, OK : Oklahoma Department of Transportation, 2015., 2015-01)
Rising oil and gas prices spurs development of methods and technologies for reducing fuel consumption and increased use of recycled materials. With increased environmental awareness, using reclaimed asphalt pavement (RAP) ...
EVALUATION OF THE HAMBURG RUT TESTER AND MOISTURE INDUCED STRESS TESTER (MIST) FOR FIELD CONTROL OF HOT MIX ASPHALT (HMA) IN OKLAHOMA (FHWA-OK-13-01 2226)
(2013-3)
This report covers the evaluation of the Hamburg Loaded Wheel Rut Tester (OHD L-55) and the Moisture Induced Stress Tester (MIST) for field control of Oklahoma HMA mixtures. OHD L-55 was evaluated as a possible replacement ...
LONG TERM PAVEMENT PERFORMANCE MONITORING OF SIX LTPP SPS-10 SECTIONS IN OKLAHOMA WITH 3D LASER IMAGING (FHWA-OK-19-05 2115)
(2019-12)
Under the LTPP Specific Pavement Study 10 (SPS-10) experiment initiative, the Oklahoma Department of Transportation (ODOT) constructed five warm mix asphalt (WMA) testing sections and one hot mix asphalt (HMA) control ...
QC/QA TESTING DIFFERENCES BETWEEN HOT MIX ASPHALT (HMA) AND WARM MIX ASPHALT (WMA) (FHWA-OK-13-02 2218)
(2013-1)
WMA represents a group of technologies which allow a reduction in temperatures at which asphalt mixtures are produced and placed on the road. ODOT Materials Division has conducted preliminary inquiries into QC/QA testing ...
Risk Analysis of ODOT's HMA Percent Within Limits (PWL) Specification (FHWA-OK 07(03) 2128
(2007-8)
The Oklahoma Department of Transportation (ODOT) is considering switching its method of payment for hot mix asphalt (HMA) construction from their current procedure to a Percent Within Limits (PWL) specification. Quality ...