Impacts of prospective LEED building's energy loads on a borehole heat exchanger: A case study in Central Illinois
View/ Open
Date
2022Author
Zhao, Zilong
Stumpf, Andrew
Lin, Yu-Feng
Wang, Xinlei
Metadata
Show full item recordAbstract
Assessing the thermal behavior in the subsurface surroundings of a borehole heat exchanger (BHE) is necessary for evaluating the performance of GSHP systems. In this study we undertook a preliminary thermal analysis on a constructed GSHP system that is coupled to a LEED-certified building, the Campus Instructional Facility (CIF), at the University of Illinois at Urbana-Champaign, The building is designed to utilize multiple energy-saving technologies that achieve a building performance of LEED-Gold certification. Energy modeling of the entire building was performed in DesignBuilder software by considering all of the high efficiency thermal-insulated features, and the building energy load was obtained and used in the iterations of the ground thermal response model. An analytical model (Erol & Francois 2018) was applied to evaluate the thermal response from a single BHE within a multilayer geology considering the annual energy extraction/rejection from the building. A parallel scenario was considered for comparison when the GSHP was coupled to a building with a typical heating-dominated load profile in central Illinois. The difference in the development of isotherms around the BHE are simulated to demonstrate the benefits of coupling green buildings and GSHP. This research may facilitate the wider implementations of GSHP systems with energy-efficient buildings.