Show simple item record

dc.contributor.authorMa, J.
dc.contributor.authorLu, H.
dc.contributor.authorLi, M.
dc.contributor.otherInternational Conference on Web Handling (2005)
dc.date.accessioned2019-11-08T22:56:53Z
dc.date.available2019-11-08T22:56:53Z
dc.date.issued2005-06
dc.identifieroksd_icwh_2005_ma
dc.identifier.citationMa, J., Lu, H., & Li, M. (2005, June). Shear slitting of aluminum webs. Paper presented at the Eighth International Conference on Web Handling (IWEB), Stillwater, OK.
dc.identifier.urihttps://hdl.handle.net/11244/321886
dc.description.abstractShear slitting of aluminum webs using both disk knives and block knives were investigated using a laboratory slitter. The effects of the clearance, overlap, blade overdrive, and cant angle on burr height were studied on four different aluminum webs. It was observed that the burr height is small when the clearance was less than a critical value, and the burr height increased drastically when the clearance was larger than the critical value. The effect of overdrive was negligible for the experiments performed. The burr formation was revealed through a series of micrographs at different stages of slitting.
dc.formatapplication/pdf
dc.languageen_US
dc.publisherOklahoma State University
dc.rightsIn the Oklahoma State University Library's institutional repository this paper is made available through the open access principles and the terms of agreement/consent between the author(s) and the publisher. The permission policy on the use, reproduction or distribution of the article falls under fair use for educational, scholarship, and research purposes. Contact Digital Resources and Discovery Services at lib-dls@okstate.edu or 405-744-9161 for further information.
dc.titleShear slitting of aluminum webs
osu.filenameoksd_icwh_2005_ma.pdf
dc.description.departmentMechanical and Aerospace Engineering
dc.type.genreConference proceedings
dc.type.materialText


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record