| dc.contributor.author | S Raman | |
| dc.contributor.author | J Chellaperumal | |
| dc.date.accessioned | 2016-01-14T19:53:54Z | |
| dc.date.accessioned | 2016-03-30T15:31:23Z | |
| dc.date.available | 2016-01-14T19:53:54Z | |
| dc.date.available | 2016-03-30T15:31:23Z | |
| dc.date.issued | 2002-07-01 | |
| dc.identifier.citation | Raman, S., & Chellaperumal, J. (2002). Re-examining the machining frictional boundary conditions using fractals. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 216(7), 993-997. doi: 10.1243/09544050260174193 | en_US |
| dc.identifier.uri | https://hdl.handle.net/11244/25521 | |
| dc.description.abstract | This paper presents experimental evidence for the existence of non-Euclidean contact geometry at the tool-chip interface in the machining of aluminium alloy, which challenges conventional assumptions. The geometry of contact at the tool rake face is modelled using fractals and a dimension is computed for its description. The variation in the fractal dimension with the cutting speed is explored. | en_US |
| dc.language.iso | en_US | en_US |
| dc.publisher | Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture | |
| dc.subject | machining frictional boundary | en_US |
| dc.subject | fractals | en_US |
| dc.subject | tool-chip interface | en_US |
| dc.subject | aluminium alloy | en_US |
| dc.title | Re-examining the machining frictional boundary conditions using fractals | en_US |
| dc.type | Research Article | en_US |
| dc.description.peerreview | Yes | en_US |
| dc.description.peerreviewnotes | https://us.sagepub.com/en-us/nam/manuscript-submission-guidelines | en_US |
| dc.identifier.doi | 10.1243/09544050260174193 | en_US |
| dc.rights.requestable | false | en_US |
