Search
Now showing items 11-20 of 58
Generative Design, Characterization, and Testing for Additive Manufacturing of Lightweight Structures
(2023-05-12)
Generative design has developed over the years through various CAD software’s and has changed the industry in new ways. Generative design has opened a new aspect of engineering that can change industries through design ...
Design and development of a Selective Laser Sintering (SLS) 3D printer for potential biomedical engineering applications.
(2023-05)
An additive manufacturing method called Selective Laser Sintering (SLS) involves heating material particles to bond them together. Each two-dimensional layer is selectively sintered in the fabrication piston until the part ...
Development of an Empirical Propeller Thrust Model Using Experimental Measurements and Computational Fluid Dynamics
(2020-05)
Autonomous unmanned aerial vehicles (UAVs) are playing an ever-increasing role in naval operations. In order for these UAVs to safely operate autonomously in a wide range of conditions, robust control systems must be ...
Computational investigations of a shape‐memory polymer foam embolization device for intracranial aneurysms
(2021)
The objective of this research is to determine the efficacy of an intracranial aneurysm treatment option. An open‐source computational fluid dynamics software is used to simulate blood flow through 6 patient‐specific ...
PRACTICAL COUGH DETECTION IN PRESENCE OF BACKGROUND NOISE AND PRELIMINARY DIFFERENTIAL DIAGNOSIS FROM COUGH SOUND USING ARTIFICIAL INTELLIGENCE
(2020-05-07)
Cough is one of the most common symptoms for many of the diseases. Physicians have been using characteristics of cough for preliminary diagnosis of certain respiratory diseases for ages. But the methods have been subjective ...
Investigation of 3D Printed Porous Polydimethylsiloxane (PDMS)/Carbon Nanotube (CNT) Nanocomposites for Sensing Application
(2020-07-30)
Sensors manufactured using piezoresistive elastomeric nanocomposites have a wide range of applications in fields such as structural health monitoring, robotics and biomedical industries. These nanocomposites are a mixture ...
Enhancing Performance and Reducing Emissions in Natural Gas Aspirated Engines through Machine Learning Algorithm
(2023-12-15)
In an era where the global energy landscape is increasingly defined by the dual imperatives of efficiency and sustainability, the natural gas sector stands at a crucial juncture. The engines powering this sector, especially ...
Design and Analysis of a Novel Freeze Desalination System for Treatment of Oil and Gas Produced Water
(2021-05-14)
Freeze desalination is an alternative technology that has received a lot of attention due to several advantages. Among these, the lower energy consumption and low operation temperature are the most important ones. The ...
Piezoresistive Sensing in Additively Manufactured Prosthetics
(2022-12)
This paper attempts to determine whether hobbyist 3D printers can be used to advance
prosthetic capabilities. We attempt to answer this by designing, printing, and testing a
prosthetic hand using a hobbyist 3D printer ...
Analysis and Application of Virtual-Flow Meter Technology for Chiller-Water Valve and Outside-Air Controls
(2022-05)
The following work focuses on using virtual flow meters (VFM) for HVAC controls and how
they can replace physical sensors to reduce cost and increase efficiency. The study focuses on
implementing VFM to measure outdoor ...