Browsing OU - Theses by Title
Now showing items 30-49 of 2132
-
A subsurface study of the Lower Red Fork Sandstone in the deeper part of the Anadarko Basin in Caddo and Washita Counties, Oklahoma
(2008)The Lower Red Fork Sandstone in the Anadarko Basin is of Pennsylvanian age (Desmoinesian Series), within the Cherokee Group. This subsurface analysis of the Lower Red Fork Sandstone in Caddo and Washita Counties, Oklahoma ... -
A survey of the Seminole freedmen
(1951) -
A technical and economic evaluation of selected biomass-to-fuels conversion processes
(Norman : [s.n.],, 1979)The major objective of this study was to determine the economic and technical feasibility of existing methods for producing readily useable fuel from biomass. A thorough literature search was undertaken in an effort to ... -
A validation of visual impending collision warnings for drivers heading straight through a signalized intersection
(2013)Approximately 4% of all fatal crashes in the United States (1,092) occurred in cross path collisions at signalized intersections (NHTSA, 2011). This type of crash is especially dangerous as the victim driver is often ... -
Abrupt Agricultural Flash Drought: An Investigation of Rapid Drought Development Across Vital Agricultural Zones of the United States
(2023-05-12)Flash droughts are highly impactful, subseasonal to seasonal events that pose a severe risk to agricultural production. The 2012 flash drought event in the United States is a prime example, as this event resulted in tens ... -
Accelerating Distributed Synthetic Aperture Radar Data Simulations Via CUDA
(2022-05)A general simulation of distributed synthetic aperture radar (DSAR) data is useful to evaluate the theoretical performance of a DSAR system and its underlying algorithms without a deployed system in place. Simulating DSAR ... -
Accessing the impact of unmodeled systematic error variance on measurement invariance tests
(2022-08)Systematic error variance (SEV) is one of sources that make a measurement noninvariant (DeShon, 2004). In the confirmatory factor analysis (CFA), researchers use the bifactor or correlated uniqueness (CU) model to control ... -
Accountability, Ownership, and Satisfaction: An Innovative Approach to Teamwork in Engineering Education
(2024-05-12)Teamwork skills are essential for engineers to be successful in their careers. Engineers often work in teams to solve complex problems. Unfortunately, learning power skills, such as teamwork, can pose a significant challenge ... -
Accurate vehicle classification including motorcycles using piezoelectric sensors
(2012)State and federal departments of transportation are charged with classifying vehicles and monitoring mileage traveled. Accurate data reporting enables suitable roadway design for safety and capacity. Vehicle classifier ... -
Acoustic Velocity Study in Tight Anhydritic Dolomite of the Late Permian Khuff Formation
(2016-12-16)Carbonate reservoirs are usually associated with diagenesis processes which result in complex mineralogy and pore structure. As a result, rock physics models that predict the petrophsyical properties using seismic based ... -
ACTIVATION OF MURINE DENDRITIC CELLS THROUGH STING PATHWAY INTERACTIONS WITH GLYCATED CHITOSAN
(2024-05-10)N-dihydrogalactochitosan (Glycated Chitosan, GC) is a promising immunoadjuvant for cancer therapeutics. Synthesized from chitin and galactose, GC stimulates the innate and adaptive antitumor immune responses more potently ... -
Adaptive Classroom Project Management: Facilitating Collaborative Science Inquiry with Scrum
(2017-05-12)New standards such as NGSS require science teachers to shift the focus of classroom teaching to making sense of phenomena and designing solutions to problems, engaging in three dimensional learning, and developing 21st ... -
Additions From an Apostate: Petrus Alfonsi and a Shift in Anti-Jewish Polemic
(2018-05-12)In the Twelfth Century, Petrus Alfonsi converted from Judaism to Christianity and wrote his Dialogi contra Iudaeos. In this polemical text, Alfonsi utilized Islamic science and reason to attack Judaism and the Talmud as ... -
Additive Manufacturing of Continuous Carbon Fiber Reinforced Polylactic Acid Composites
(2020-05-08)Fused deposition modeling (FDM) is a category of additive manufacturing in which parts are fabricated via extrusion of material along a print path one layer at a time. A part is first created as a 3D computer-aided design ... -
Additive Manufacturing of HDPE Using Selective Laser Sintering
(2019-05-10)Selective Laser Sintering (SLS) is an additive manufacturing technique that bonds solid powder particles into complex 3-Dimensional (3D) shapes. These objects are constructed by repeatedly sintering or fusing layers of ... -
ADDITIVE MANUFACTURING OF LOW-TEMPERATURE CO-FIRED CERAMICS FOR MICROWAVE APPLICATIONS
(2016-05-14)Additive manufacturing (AM) technologies enable fabrication of structures directly from CAD files. Due to these technologies adding material one layer at a time, complex, 3D structures can be realized. The microwave industry ... -
Additive Manufacturing of Polydimethylsiloxane (PDMS)/Carbon Nanotube (CNT) Nanocomposite Sensors
(2019-05-10)Highly elastic nanocomposite strain sensors have recently received considerable attention in academic research due to broad applications in fields, such as biomedical and robotics. These sensors combine flexible polymers, ... -
Addressing Outdoor Throughput Sensitivity for Mobile Vehicles by Enhancing the VMESH MAC Protocol
(2019-05)To provide safe and efficient transportation, Vehicular Ad-Hoc Networks (VANETs) allow for the communication between a vehicle to another vehicle and for the communication between vehicles and stations near the road. As ...