Search
Now showing items 1-6 of 6
Experimental and computational analysis of the aerodynamics of melt blowing dies.
(2004)
An experimental and computational study of melt blowing jets and processes was done. Computational studies were done on three types of melt blowing jets: conventional annular, tapered annular and swirling. Conventional ...
On-Line measurement and mathematical modeling of fiber properties during the melt spinning and melt blowing processes /
(1997)
The on-line measurements during the melt spinning process were used to quantitatively evaluate the effect of molecular orientation (caused due to threadline stress) on the crystallization rate of polymers.
Characterization of admicellar polymerized and other thin films using scanning probe microscopy (SPM).
(2001)
Characterization techniques and results of polymer and inorganic thin films using Scanning Probe Microscopy (SPM) were presented. In view of principle, equipment and operation of SPM sample preparation, and surface ...
Admicellar-polymerized thin elastomeric coatings for engineered interfaces for enhanced composite performance.
(2003)
A surface-polymerization technique known as admicellar polymerization has been evaluated as an alternative method to tailor the interfacial properties of glass/epoxy composite parts molded by resin transfer molding (RTM). ...
Surfactant behavior in the mechanisms of ink removal from secondary fiber in flotation deinking.
(1997)
To date, the majority of the research into ink removal from secondary fiber by the flotation deinking method has centered about empirical research, and the fundamental mechanisms have not been well understood. In this ...
An experimental study of fiber motion and nonwoven webs in melt blowing.
(1997)
An experimental study of fiber motion and nonwoven webs in melt blowing was done. Fiber motion was characterized in terms of the fiber vibrations--amplitude and frequency of vibrations--and the fiber position distribution. ...