Search
Now showing items 1-5 of 5
Buoyancy effects on flow structure and instability of low-density gas jets.
(2004)
Linear temporal and spatio-temporal stability analyses of a low-density round gas jet injected into a high-density ambient gas were performed by assuming hyper-tan mean velocity and density profiles. The flow was assumed ...
Effect of post-fill pressure and nanoclay on void morphology in resin transfer molded composites.
(2004)
Resin transfer molded (RTM) composites usually suffer from the formation of flow-induced defects such as voids. Detrimental effects of voids on performance of molded parts have been studied extensively. Yet, knowledge of ...
Effects of process parameters and mold design on resin transfer molded composites.
(2004)
The effects of flow rate and post-fill cure pressure, i.e., packing pressure, on the mechanical properties of resin transfer molded disks are experimentally investigated. Disks are molded at different flow rates and packing ...
Buckling and flexural vibration of rectangular plates subjected to half sinusoidal load on two opposite edges.
(2004)
The problem of buckling of thin rectangular plates subjected to uniform and linearly varying in-plane load has been solved quite some time back beginning with the work of Bryan in 1890--91. Recently, Leissa and Kang obtained ...
A study of lean premixed swirl-stabilized combustion of gaseous alternative fuels.
(2004)
The burner was constructed of 1.5&inches; (3.8 cm) schedule 40 steel pipe. Fuel injectors were placed 40 cm upstream of the burner to ensure that the fuel and air were fully premixed prior to combustion. The fuel air mixture ...