Search
Now showing items 21-30 of 89
A bone tissue engineering approach based on the combination of biomimetic scaffolds and flow perfusion culture.
(2007)
Bone tissue engineering has progressively emerged as a response to the current limited replacement therapies for damaged or lost bone tissue. Ideally, the implanted construct should aid in complete bone regeneration in a ...
Controlled structures and properties of single-walled carbon nanotubes custom-produced by chemical vapor deposition method.
(2006)
Single walled carbon nanotubes (SWNT) are considered as one of the most promising nanomaterials for a large variety of applications that require SWNTs with controlled structures and properties, which is the main focus of ...
Fischer-Tropsch synthesis on carbon nanotube-supported catalysts in water-in-oil emulsion
(2013-12-04)
Fischer-Tropsch synthesis (FTS) is an important gas-to-liquids technology in the modern energy industry. The current trend is to carry it out in liquid reaction media in order to take advantage of good heat transfer, high ...
Surface investigations of the mechanism of single walled carbon nanotube growth by carbon monoxide disproportionation over a cobalt-molybdenum catalyst.
(2003)
To examine the validity of this hypothesis different catalyst formulations and reaction conditions have been used. These series of tests included the doping of the Co Mo catalyst with sodium, the substitution of molybdenum ...
Mixing rules and unlike interaction parameter correlations for characterization parameters in a three-parameter corresponding-states thermodynamic properties correlation.
(1981)
The conformal solution method is used as the basis for developing mixing rules for the characteristic parameters appearing in a three-parameter, corresponding-states correlation of thermodynamic properties. A logical ...
Synthesis of polymer nanostructures via the use of surfactant surface aggregates as templates.
(2007)
The subject of this work is the synthesis of polymer nanostructures via the use of surfactant surface aggregates as templates, also termed Template Assisted Admicellar Polymerization (TAAP). The first chapter reviews some ...
Experimental and computational analysis of the aerodynamics of melt blowing dies.
(2004)
An experimental and computational study of melt blowing jets and processes was done. Computational studies were done on three types of melt blowing jets: conventional annular, tapered annular and swirling. Conventional ...
Manganese tetraoxide based polyalkenoate cements.
(2006)
Polyalkenoate cements resulting from reaction between Mn3O4 with acrylic acid and poly(acrylic acid) have been analyzed by Fourier transform infrared spectroscopy (FTIR) and x-ray photoelectron spectroscopy (XPS). This ...
COMPUTATIONAL STUDY OF LIQUID-SOLID INTERFACE
(2020)
The solid interface is of fundamental importance to numerous scientific and technological fields, such as heterogeneous catalysis, water splitting, electrochemistry, corrosion, drug delivery, tribology, and wetting. However, ...