Browsing by Title
Now showing items 50426-50445 of 84795
-
Modeling of nip pressures and web feed rates in rubber covered nip rollers
(Oklahoma State University, 2013-06)Nip rollers are used extensively in converting processes; however, correct design and usage of these types of rollers requires a sound understanding of the mechanics of the nip in both the machine and cross-width directions. ... -
Modeling of non-equilibrium effects in particulate flow through porous media
(2018)The complex dynamics of fluid and particles flowing through pore space demands some relaxation time for particles to catch up with fluid velocity which manifest themselves as non-equilibrium (NE) effect. Previous studies ... -
Modeling of Pressures and Quality in a Water Distribution System
(Oklahoma State University, 2000-07-01) -
Modeling of Radial Flow Dynamics for Fixed Bed Reactor
(Oklahoma State University, 2005-12-01)The purpose of this research was to study the flow distribution in the radial fixed bed reactors (RFBR) and suggest ways to improve the flow distribution. Three different geometries were created to study the flow distribution ... -
Modeling of Reverse Osmosis and Prediction of Reverse Osmosis Membrane Performance
(Oklahoma State University, 1997-05-01)This study deals with modeling of reverse osmosis and prediction of performance of reverse osmosis membranes for four monovalent ions in aqueous solutions. This work is based on work done by Sunil Kar. A computer code is ... -
Modeling of Sensor Networks - Attack Surface, Qos Surface
(Oklahoma State University, 2006-05-01)The availability of low-power micro-sensors, actuators, radios and embedded processors is enabling the application of distributed wireless sensing to a wide range of applications such as environmental monitoring, condition ... -
Modeling of standing column wells in ground source heat pump systems
(2004-12)The need for alternative low-cost energy sources has given rise to the development of ground source heat pump systems for residential and commercial heating and cooling applications. Standing column wells can be used as ... -
Modeling of the aerosol-cloud interactions in marine stratocumulus.
(1997)In order to study the cloud processing of aerosols, a two-parameter drop spectrum that depends on both the drop mass and the solute mass has been introduced into the CIMMS LES model. The aerosol processing due to condensation, ... -
Modeling of the manufacturing and assembly costs for tolerance determination in selective assembly.
(2002)The results serve as a first proof-of-concept for the combined tolerance-cost-time problem. This model can be used for process selection during process planning. Most importantly, this approach provides a mathematical basis ... -
Modeling of the pyrolysis and ignition of wood /
(The University of Oklahoma., 1975) -
Modeling of the transport behavior of low modulus webs
(Oklahoma State University, 2013-06)We consider three key issues in this study for low modulus webs. First, transport in the high strain region is considered when the materials exhibit nonlinear and viscoelastic behavior. Second, in-plane biaxial strain is ... -
Modeling of Thermal Effects on a Single Span Web Handling System
(Oklahoma State University, 1999-05-01) -
Modeling of Turbulent Particulate Flow in the Recirculation Zone Downstream of a Backward Facing Step Preceding a Porous Medium
(Oklahoma State University, 2010-12-01)The current study focuses on flow characteristics and particle motion in the recirculation zone downstream of a backward facing step preceding a porous medium. A two dimensional backward facing step is created in ICEM CFD ... -
Modeling of vertical ground loop heat exchangers for ground source heat pump systems
(1999-12)The ability to predict both the long-term and short-term behavior of ground loop heat exchangers is critical to the design and energy analysis of ground source heat pump systems. For detailed analysis and accurate ... -
Modeling of Viscoelastic Effects on Web Handling System Behavior
(Oklahoma State University, 1995-05-01) -
Modeling Oscillatory Flow in a Cone-and-Plate Device Using Computational Fluid Dynamics
(2019-05-11)Calcific aortic heart valve disease has been investigated in literature over the past three decades. Researches have been trying to understand the mechanism by which the calcification occurs on the aortic valve leaflets. ... -
Modeling Packaged Heat Pumps in a Quasi-steady State Energy Simulation Program
(Oklahoma State University, 2005-05-01)The purpose of this study is to validate steady-state heat pump models implemented in EnergyPlus. The heat pump models include air-to-air, water-to-air heat and water-to-water. Part load models are used to adjust the models' ... -
Modeling Perceptions of Disabled Workers
(2010)Literature regarding attitudes toward the disabled has been dominated with a few, explicit measures that typically emphasize salient, physical disabilities. However, passage of the Americans with Disabilities Act (ADA; ...