Show simple item record

dc.contributor.authorCowan, Tanner
dc.date.accessioned2018-11-21T21:25:09Z
dc.date.available2018-11-21T21:25:09Z
dc.date.issued2018-05-02
dc.identifieroksd_cowan_HT_2018
dc.identifier.urihttps://hdl.handle.net/11244/302143
dc.description.abstractDesign a wing that could withstand 13 lbf/ft^2 wing loading up to a 6g load. Once the wing was designed manufacture the wing to proper specifications and tolerances. This wing would then be tested on a rig that was designed and manufactured by other people in the group. This rig and wing will be used for educational purposes showing how a wing deflects in a simulated lift scenario.
dc.formatapplication/pdf
dc.languageen_US
dc.rightsCopyright is held by the author who has granted the Oklahoma State University Library the non-exclusive right to share this material in its institutional repository. Contact Digital Library Services at lib-dls@okstate.edu or 405-744-9161 for the permission policy on the use, reproduction or distribution of this material.
dc.titleFinal project review: Wings 'n' things
osu.filenameoksd_cowan_HT_2018.pdf
osu.accesstypeOpen Access
dc.type.genreHonors Thesis
dc.type.materialText
thesis.degree.disciplineMechanical and Aerospace Engineering
thesis.degree.grantorOklahoma State University


Files in this item

Thumbnail

This item appears in the following Collection(s)

Show simple item record