Gupta, Anuj,Wang, Wei.2013-08-162013-08-161998http://hdl.handle.net/11244/5730The objective of this study was to study the improved vertical layering method for scale-up, to develop an effective scale-up methodology, and to investigate the effects of geological modeling strategies, well locations, and reservoir boundary conditions on the scale-up of petrophysical properties. The Gypsy formation was used as the experimental site in this study.The scale-up method developed in this study was applied for three Gypsy models. It was observed that the transmissibility scale-up is only suitable for linear flow. A scale-up on productivity index must be conducted to consider the effects of radial flow around wellbore in order to obtain a satisfactory scale-up result. Significant improvements were obtained after conducting a PI scale-up. Contrary to our expectation, channel model and lithofacies model resulted in similar scale-up results, but flow unit model resulted in large errors. Comparing the scale-up results for three different production scenarios and three different boundary conditions, it was observed that the proposed scaling process provided better results in scenario involving line-drive compared to the nine-spot and five-spot scenarios. The method also produced better scale-up results for system with no-flow boundary condition compared to bottom-water drive and edge-water drive.Three Gypsy models, channel model, lithofacies model, and flow unit model, were generated in this study. A methodology for scale-up was developed, in which transmissibility, instead of permeability, was scaled up. After a linear scale-up was conducted between the grid blocks, a scale-up on productivity index, or PI scale-up, was performed to consider the radial flow around the wellbore. Special considerations were given to the pinch-out grid blocks in the system in order to obtain a representative flow simulation. Two hypothetical models, a layer-cake model and a pinch-out model were used to illustrate the application of the methodology. Successful scale-up results were obtained after a PI scale-up technique around the wellbore was applied.xix, 186 leaves :Oil reservoir engineering Mathematical models.Engineering, Petroleum.Geological modeling.Thesis